Silver Spring Tilt-A-Rack Aluminum Scooter and Wheelchair Full-Size Carrier - 500 lb. Cap

The innovative Tilt-a-Rack series of scooter and power chair carriers features patented tilting carrier technology with an integrated slide-out ramp system. This is by far the easiest and safest loading system available on the market with no ramps to fold, unfold or stow away separately.

To use the carrier simply pull the tilt handle, slide out the ramp from under the platform, tilt towards the ground and you are ready for loading. The entire carrier shifts back to its original upright position using the weight of the scooter while it is being loaded. This is by far the easiest and safest loading system available on the market with no ramps to fold, unfold or stow away separately. This full size carrier is specifically designed to carry most full size scooter and chairs that weigh up to 500 lbs.

This Tilt-a-Rack scooter carrier is made from high-strength aluminum which will never rust and weighs only 103 lbs. Installation is a breeze and requires no hook-up to your vehicle's electrical system. When not in use this carrier conveniently folds up against the back of your vehicle to make driving and parking easy and safe. This carrier comes with a hitch pinch bolt to stabilize the carrier while transporting your mobility aid. US Patent number 7,841,821.

Please note, hitch-mounted mobility carriers are not recommended for use on tow-behind trailers including 5th wheel and camping trailers, motor-homes or RVs. Never exceed the lowest maximum rating of either of these two: vehicle’s tongue weight and vehicle’s trailer hitch tongue weight. Be aware that your hauling weight may be limited by your vehicle's suspension. Some vehicles may require air shocks or heavier springs to stiffen up the suspension and prevent sagging. Carriers are not recommended for hitches less than 12" from the ground to the bottom of the hitch without the use of a riser adapter.